• This oximeter can measure and monitor heart rate, SpO2 and pulse intensity with high accuracy. Displays waveform (plethysmograph) and digital readings, as well as pulse bar graphs, to visually indicate any irregularities or abnormalities, such as weak heartbeat. FDA 510(K) Cleared.

• Insert finger into rubber of the pulse oximeter and press “on”. Intelligent tool for exercise recovery, elderly, hikers, climbers (monitor the oxygenation rate of cells, for overall health). Essential to take reading without moving the body or hand to obtain accurate result.

• Monitor is very light, small in size, low in power consumption and easy to carry with detachable lanyard; so, you can measure oxygen saturation anywhere. Auto power off s seconds after removing finger saves battery life. Requires two AAA batteries (not included).
• The pulse oxygen saturation is the percentage of HbO2 in the total Hb in the blood, so-called the O2 concentration in the blood. It is an important bio-parameter for the respiration. For the purpose of measuring the SpO2 more easily and accurately, our company developed the Pulse Oximeter. At the same time, the device can measure the pulse rate simultaneously.The Pulse Oximeter features are small size, low power consumption, convenient operation, and portability. It is only necessary for the user to put one of his fingers into a fingertip photoelectric sensor for a reading, and the display screen will directly show measured value of Hemoglobin Saturation.ADVANTAGES:
  • Operation is simple and convenient.
  • Small Size, light weight and convenient carrying lanyard.
  • Power consumption is low and the two originally equipped AAA batteries can be operated continuously for 20 hours.
  • The oximeter will automatically be powered off when no signal goes to the product within 5 seconds after removing the finger being tested

Contec CMS70A Portable Tabletop Pulse Oximeter Technical Specifications:

• Display Mode: TFT Screen and LED display
• Screen Resolution: 320*240
• SpO2 Measuring Range: 0%~100%(the resolution is 1%)
• Accuracy: 70%~100%: ± 2%, Below 70% unspecified.
• PR Measuring Range: 30bpm~250bpm(the resolution is 1bpm)
• Accuracy: ± 2bpm or ± 2% (select larger)
• Measurement Performance in Weak Filling Condition: SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2 error is ± 4%, pulse rate error is ± 2 bpm or ± 2% (select larger).
• Resistance to surrounding light: The deviation between the value measured in the condition of man-made light or indoor natural light and that of darkroom is less than ± 1%.
• Power Consumption: About 350mA
• Voltage: AC 100~240V, 50/60HZ
• Power Supply: Built-in recharge Li-Polymer
• Battery working hour: After the device built-in battry finished the charge, it’s continuous working time is not less than 1 hour
• Safety Type: II device, BF Type

Contec CMS70A Portable Tabletop Pulse Oximeter Features:

• Low power consumption
• SpO2 value display
• Pulse rate value display, bar graph display
• PI display
• Pulse waveform display
• Menu operation
• Screen brightness can be changed
• The display mode can be changed
• Pulse rate sound indication can be turned on or turned off
• With measured data overruns, limits and low-voltage alarm function, the upper/down alarm range can be adjustable
• Battery capacity indication, Low-voltage indication: low-voltage indicator appears before working abnormally which is due to low-voltage and with alarm function
• Connected with an external oximeter probe
• Data storage function, and the storage data can be uploaded to a computer
• Real-time data can be transmitted to computers